Bestseller No. 1
ZENY 3,5CFM Single-Stage 5 Pa Rotary Vane Economy Vacuum Pump 3 CFM 1/4HP Air Conditioner Refrigerant HVAC Air Tool R410a 1/4" Flare Inlet Port, Blue
- Inlet Port: 1/4" Flare, Warm note: 1)Pressure Scale:0~400psi, 0~140psi 2)Length of hose:1.2m Red:1/4''-1/4'' Yellow:1/4''-1/4'' Blue:1/4''-1/4'' Please make sure your manifold gauge is in accordance with this size. Any question in using, please contact seller first. *** A self-paying vacuum pump Adapter needed if inflet not suitable.
- High Efficiency and Low Noise, Heavy-duty Aluminum Alloy Casing, Oil Drain Plug Positioned at Bottom of Oil Reservoir,Internal High Volume Cooling Fan for Extended U
- Exhaust Port with Exhaust Cap, Direct Drive Motor Allowing Easy Starting Which is Maintenance Free
- Oil Sight Glass For Monitoring Oil Levels, ON/OFF Switch
- Non Slip Cushion Handle, Comes With a Bottle of Vacuum Oil
Bestseller No. 2
NewPosition 3.0 CFM Single-Stage 5 Pa Rotary Vane Economy Vacuum Pump for HVAC, Air Conditioner Refrigerant,Food Packaging,Milking, 1/4" Flare Inlet Port, Blue
- ✅Key Parameter:Inlet Port: 1/4" Flare,1/4 HP,Flow Rate:3.0 CFM.Rated Voltage:110V/ 60HZ,Ultimate vacuum:5 PA, Oil Capacity: 220ml
- ✅High Efficiency: Direct drive motor allowing easy starting, ,built-in high volume cooling fan for thermal protection.
- ✅Humanization Design:Oil Sight Glass For Monitoring Oil Levels,Low noise,Exhaust Port with Exhaust Cap,multi-layer filter meet all user requirements.
- ✅Special Improvement:Lightweight cast aluminum construction for maximum durability,precision machined gear,multi-layer filter show better performance.
- ✅Widely Application: Perfect for maintenance of air conditioners, automobiles and refrigerators, vacuum packaging of food and experimental pumping.
SaleBestseller No. 3
Robinair (15500) VacuMaster Economy Vacuum Pump - 2-Stage, 5 CFM
- Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service; featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet
- 5 CFM free air displacement; factory rated to 35 microns
- 1/3 HP, 115V/60 Hz thermally protected motor
- Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life
- 1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining
Bestseller No. 4
Toolly 3 Gallon Vacuum Chamber and 3 CFM Pump Kit for Degassing Silicone Epoxy
- Preventing oil—returning design The passage for gas entering is specially designed,which can prevent the oil flowing back and so prevent the pumped container and tubes from being polluted.
- Environment—protecting design The tank is separated ,and there are separating devices at the exhaust port,lt can avoid oil—spraying and reduse pollution.
- Overall design The electric machinery and the pump are wholly designed and direct drive,which makes the product more compact,lighter and more rational.Low noise and vibration. An elastomeric coupling insert between the motor and module results in extremely quiet,smooth—running operation.
- Alloy aluminium casing Alloy aluminium casing is used in this kind of electrical mavhinery,it has high heat—scattering efficiency,which can keep the pump run—fling normally,long—lasting.And it has better outer—figure quality.
- Great starting moment The design of great starting moment is easy for starting and high in efficiency,which can keep it running normally even in lower tewperature environment and lower volt.Forced—feed lubrication system(dual—stage vacuum pump). The products incorporate the lubrication system designed to provide clean,filtered oil to all internal bearings and wear surface regardless of the pump operateing pressure.Cleaner oil means reduced maintenance and lower operating costs.
Bestseller No. 5
XtremepowerUS 3CFM 1/4HP Air Vacuum Pump HVAC R134a R12 R22 R410a A/C Refrigeration Kit AC Manifold Gauge R134 Can Tap Included Carrying Tote
- SIMPLE BUT POWERFUL - XtremepowerUS 1/4 HP 3 CFM 1-Stage Rotary Air Vacuum Pump is designed to have high efficiency and low noise output with internal high volume cooling fan for extended use (Include R-134A automotive air conditioning dispensing valve design with hand operated punch/valve control, connects all R-134a refrigerant cans with 1/4" Male threads)
- HEAVY DUTY VACUUM PUMP - Die-cast Aluminum Alloy Casing enables the vacuum pump be light and durable at the same time. Equipped with brass fitting tethered safety caps to prevent oil leaks during transportation and handling.
- HVAC GAUGE READING - The XtremepowerUS HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R12, R22, R134a and R410a
- EASY OIL CHANGE - The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned beneath the oil reservoir to quickly drain when needed. Checking the spillage meter will help to ensure the proper level of oil.
- PACKAGE INCLUDED: Multicolored set of three 36” hoses, Manifold Gauge, R134 Can Tap, Vacuum Pump Oil Bottle, Accessories and Storage Bag to keep equipment clean and dust free