Bestseller No. 1
Universal Adjustable EFI Aluminum Fuel Pressure Regulator Kit with 0-100 psi Gauge AN6-6AN Fuel Line Hose Fittings (Black&Red)
- 🔧Comes with a fuel pressure regulator, -6AN inlet ports and return port.
- 🔧The fuel hose made of 304 stainless steel & CPE synthetic rubber, Length: 170mm & 380mm & 660mm
- 🔧The hose end fitting made of high quality T6061 Aluminum and -6AN size.
- 🔧Comes with a 1-3/4'' | 45mm gauge & 1/8'' NPT gauge port, adjustable from 0 to 100 psi to maximum fuel pump capacity.
- 🔧Support high power application: 300-800 H
Bestseller No. 2
EVIL ENERGY 0-15psi Adjustable Carburetor Fuel Pressure Regulator Kit Universal with Pressure Gauge and 6AN ORB Adapter Aluminium Black&Red
- The fuel pressure regulator is advantageous in the carburetor system, regulates the pressure of the fuel flowing through the system, keeps constant fuel pressure over, even during dramatic changes in fuel demand, a bypass-regulator can react more quickly to sudden changes in engine load.By plumbing a by-pass regulator style before the carburetor,drag racers can build higher pressure in the feed to help counteract the high g-forces that they experience during hard launches and rapid acceleration
- A bypass / return carb fuel pressure regulator bleeds off excess fuel pressure, dumps it into a return line, and recirculates the fuel back into the tank. This Bypass style design helps to eliminate pressure creep, lower fuel temperatures and provides a more stable pressure curve. This carb fuel pressure regulator kit lowers the load on the fuel pump also decreases the voltage it uses, makes the pump quiet and can also increase the fuel pump's life expectancy.
- Universal fit for most vehicle's Carburetor system. Adjustable pressure range: 0-15psi. You can regulate the pressure to your needs. Adjust the set screw on top to get the desired pressure. The fuel regulator pressure gauge range is 0-15psi. Provides two ORB-06 inlet/outlet ports, one ORB-06 return port and one 1/8" NPT gauge port (NPT thread requires thread sealant to seal). It does not matter the direction of flow through the inlet/outlet.
- The Mounting location of the fuel pressure regulator is depending on the application. In street - strip applications, we recommend positioning the adjustable fuel pressure regulator on the backside of the fuel log allows fuel to flow unrestricted to the carburetor but still regulates the pressure and returns the unused fuel back into your gas tank. In drag cars with rear-mounted fuel tanks that launch very hard, it may be beneficial to position the regulator before the carburetor.
- Professional installation is highly recommended. The carburetor fuel pressure regulator installation instruction included in the package. We provide after-sales service for the fuel pressure regulator kit. Any problem you have, you can contact EVIL ENERGY by Amazon message.
SaleBestseller No. 3
Mr. Gasket - 9710 Fuel Press Regultr W/Hdwr, Chrome
- Genuine Mr. Gasket product
- Designed for performance
- Made from quality materials
- Easy installation
- Fit type: Vehicle Specific
Bestseller No. 4
KKmoon Fuel Pressure Regulator Kit, Gunmetal Fuel Pressure Regulator, Adjustable Universal for Carburetor Engine
- Includes three steel clips and 8mm fittings for 8mm bore push-on fuel hose.
- There is an adjustable range of 1 to 5psi via A numbered dial on top.
- Ideal for facet fuel pumps to control the fuel pressure to the carburetor.
- High-quality zinc alloy construction anti-corrosion performance, super longevity.
- The maximum input pressure should not exceed 7psi.
Bestseller No. 5
EVIL ENERGY 30-70psi Adjustable EFI Fuel Pressure Regulator Bypass Return Kit Universal with Pressure Gauge and 6AN ORB Adapter Aluminium Black&Red
- The fuel pressure regulator is a must have item for any EFI system, regulates the pressure of the fuel flowing through the system, keeps constant fuel pressure over, even during dramatic changes in fuel demand. This bypass pressure regulators return style provides constant effective fuel pressure to the outlet port - pressure overage is bled off through the return port as needed.
- The fuel pressure regulator regulates the fuel pressure against the air pressure/boost, this leads to that the fuel injector can maintain the perfect ratio between fuel and boost and is good for promoting car performance, ensuring great lifespan and reliability. This EFI fuel pressure regulator kit can be capable of supporting applications up to 1000 HP, the EFI Bypass Regulator can handle high-flow EFI fuel pumps and the most aggressive street machines.
- Adjustable pressure range: 30psi -70psi. You can regulate the pressure to your needs. The fuel regulator pressure gauge range is 0-100psi. Provides two ORB-06 inlet/outlet ports, one ORB-06 return port, one vacuum/boost port and one 1/8" NPT gauge port (NPT thread requires thread sealant to seal). Material: Aluminum Alloy. Package included:as the main pic shown.
- Universal fit for most vehicle's EFI system. The optimum adjustable fuel pressure regulator location is after the fuel rail(s) when possible. The bottom is the return (return excess fuel through the line to fuel tank), and the sides are the inlet and outlet. It does not matter the direction of flow through the inlet/outlet. Adjust the set screw on top to get the desired pressure.
- Professional installation is highly recommended. The efi fuel pressure regulator installation instruction included in the package. We provide after-sales service for the fuel pressure regulator kit. Any problem you have, you can contact EVIL ENERGY by Amazon message.